Canon PIXMA MX922 Wireless Setup Guide

Canon PIXMA MX922 Wireless Printer Setup. This article guide to settings your Canon PIXMA MX922 The good news is that the Canon MX922's output quality does even more than its long list of features to make up for any short comings in speed. Graphics quality in my tests was at the low end of par, but text quality was just a step below the top tier for inkjets, and photo quality was in the top tier for low-cost inkjets.
 Canon PIXMA MX922 Wireless Setup

Canon PIXMA MX922 Wireless Setup Printer

Tutorial Connect My Multifunction To My Network
Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network.

Canon PIXMA MX922 Wireless Connection

Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that configuration of the computer and access point or router is complete.
The Network Connection Canon PIXMA MX922
  1. The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details,refer to your device's instruction manual or contact its manufacturer.
  2. In an office setup, consult your network administrator
  3. If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party.
  4. If an error message appears or if you have trouble with the network connection, refer to the printed manual: Network Setup Troubleshooting.
  5. Place the machine and computer on the same network segment.

Canon Pixma MX922 Guide Installing the Drivers and Software

To use the Canon Pixma MX922 by connecting it to a computer Mac,Linux,Windows, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.)
  1. Log on as the administrator (or a member of the Administrators group).
  2. Quit all running applications before installation.
  3. Do not switch users during the installation process.
  4. Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.
  5. It may be necessary to restart your computer during the installation process. Follow the on-screen instructions and do not remove the Setup CD-ROM during restarting. The installation resumes once your computer has restarted.
  6. If the firewall function of your security software is turned on, a warning message may appear that Canon PIXMA MX922 wireless setup software is attempting to access the network. If such a warning message appears, set the security software to always allow access.

Tutorial Installing Canon PIXMA MX922 Wireless Printer Setup

If you are installing your printer on your network for the first time, a step-by-step walk through of the wireless setup is built in to the installation routine of the software that shipped with your Canon PIXMA MX922 wireless setup guide.
Insert the Setup CD-ROM that came with your printer into your CD-ROM drive and proceed through the easy to follow instructions. You’ll be printing wirelessly in no time. Be sure to select Network Connection, then Wireless Connection on the Connection Method Selection screens.

1. Connecting to the Wireless Network
Canon PIXMA MX922 Wireless Setup
2. Continue to follow instructions until the Printer Setup screen appears. This is shown on the next page
3. Click Connect to the network on the Printer screen 
Continue to follow instructions until the Setup Procedure Selection screen appears. This is shown below :
    Canon PIXMA MX922 Wireless Setup
  • The printer automatically searches for access points that support WPS (Wi-Fi Protected Setup).
  • Unless you are absolutely sure your access point supports WPS and you are familiar with activating this on your access point, press the Stop button on the printer’s operation panel and click on Other Methods on the Setup Procedure Selection screen (screenshot shown below).
  • If the Push Button Method is not shown on the printer’s operation panel(when no WPS access points have been detected), select Standard setup on the printers operation panel, then click Other Methods on the Setup Procedure Selection screen
  • If you selected the Push Button Method, follow any remaining instructions to complete setup. Skip ahead to instruction
  • If you selected Other Methods, please continue to the next page for important information
4. The printer  Canon PIXMA MX922 Wireless automatically searches for access points that support WPS (Wi-Fi Protected Setup)
Unless you are absolutely sure your access point supports WPS and you are familiar with activating this on your access point, press the Stop button on the printer’s operation panel and click on Other Methods on the Wireless Printer Setup Procedure Selection screen (screenshot shown below).
Canon PIXMA MX922 Wireless Setup
  • If the Push Button Method is not shown on the printer’s operation panel(when no WPS access points have been detected), select Standard
  • setup on the printers operation panel, then click Other Methods on the Setup Procedure Selection screen
  • If you selected the Push Button Method, follow any remaining instructions to complete setup. Skip ahead to instructions
  • If you selected Other Methods, please continue to the next page for important information
Canon PIXMA MX922 Wireless Setup
  • If you don't know your Access Point / Router name or SSID, or the Passphrase or Network key for your wireless network, you can find this information during Standard setup using the Setup CD-ROM or the downloaded files (Mini Master Setup or Master Setup).
  • The terms 'SSID' and 'AccessPoint/ Router' refer to a name used to identify the specific Access Point or Router. "Passphrase' and 'Network 
Canon PIXMA MX922 Wireless Setup
Key' refer to a password required to prevent unauthorized access to communication.
Look for the Confirm the access point name or the Confirm the network key (automatic display) buttons during the setup procedure.

Clicking either of these buttons will give the needed information. See example below of the Wireless Lan Setup Information window. (appearance varies depending on Operating System). Use the provided information when selecting the Access Point / Router and for entering the Network Key

Canon PIXMA MX922 Wireless Setup

 Changing the Settings in the Wireless LAN Sheet

To change the wireless network settings of the printer, connect the printer and the computer with a USB cable temporarily.
If you modify the wireless network settings of the computer over wireless connection without USB connection, your computer may not be able to communicate with the machine after modifying the settings.
This screen is not available depending on the printer you are using.
Activate the wireless LAN setting of the printer to change the settings in the Wireless LAN sheet.
  1. Start up IJ Network Tool.
  2. Select the printer in Printers:. When the printer is connected to the computer with a USB cable temporarily, select the printer with "USBnnn" (where"n" is a number) appearing in the Port Name column.
  3. Select Configuration... from the Settings menu.
  4. Click the Wireless LAN tab.
  5. Change the settings or confirm.
  6. Click OK.
  • SSID:
  • Enter the same value that was set for the target access point.
  • When the printer is connected with USB, the Search screen appears by clicking Search.... Set the SSID of the access point by selecting the one of the detected access points.
  • Search Screen
  • Encryption Method:
  • Select the encryption method used over the wireless LAN.
  • You can change WEP settings with selecting Use WEP and clicking Configuration....
  • Changing the WEP Detailed Settings
  • You can change WPA or WPA2 settings with selecting Use WPA or Use WPA2 and clicking Configuration....
  • Changing the WPA or WPA2 Detailed Settings
  • TCP/IP Setup:
  • Sets the IP address of the printer to be used over the LAN. Set a value appropriate for your network environment.
After changing configuration, a screen is displayed asking you for confirmation before the settings are sent to the printer. If you click Yes, the settings are sent to the printer and the Transmitted Settings screen is displayed.

Canon PIXMA MX922 Full HD Movie Print: Full HD Movie Print software turns your favorite HD movie clips captured with compatible Canon EOS Digital SLR, PowerShot cameras or VIXIA camcorders into beautiful prints
3.0" LCD: Easily view, select and edit your images for simple computer-free printing. No downloading needed, just choose your picture and print!
Auto Scan Mode: With one press of the Scan button your original is automatically recognized and saved in the correct format.
Auto Document Fix: This built-in software automatically analyzes and corrects both text and image documents so text will remain clear and easy to read with pronounced edges, and pictures will keep their true color with highlights, shadows, and dots being smoothed out.
Quick Start Guide : After pressing the power button you can begin inputting commands in mere seconds so full operation is possible in a much shorter time.
Auto Photo Fix II: This built-in technology automatically categorizes your images into one of five types - Portrait, Scenery, Night Scenery, Snapshot with Scenery, and Snapshot with Night Scenery - then applies optimal image and multi-zone exposure correction. So, unexposed areas of the photo will be optimized, area by area and faces that are backlit and under-exposed will automatically be brightened with correct color cast to help ensure more accurate skin tones for gorgeous images.
Advanced Media Handling: Allows you to load plain and photo paper at the same time so you are always ready to print.
Evernote: Quickly and easily scan your documents and papers from your printer or scanner. Evernote will make your documents searchable, so you can always find what you need at anytime, on any device.
Print from E-mail: Print documents or photos attached to an e-mail just by sending the e-mail to the special address for printing from your PC, smartphone, or other types of PDA.

0 comments:

Post a Comment