HP LaserJet Pro P1102w Wireless Setup Guide

HP LaserJet Pro P1102w Print wirelessly in your home or office.
  1. System the printer without additional links, utilizing 802.11 b/g wireless systems administration.
  2. Print on a wide assortment of media, utilizing the 150-sheet paper plate and 10-sheet need information opening.
  3. Begin and complete the process of printing sooner with Instant-on Technology.
  4. Print up to 19 ppm letter/18 ppm A4.
  5. Reasonable, shared, wireless HP P1102w LaserJet imprinting in the home or office, utilizing a standout amongst the most vitality productive laser printers on the planet. Print from for all intents and purposes anyplace with HP ePrint.
  6. Business clients with little workplaces who need a reasonable, wireless setup HP LaserJet printer a standout amongst the most vitality productive laser printers on the planet.
  7. Print from basically anyplace with HP ePrint.
Set up and begin printing immediately with a simple to-use, instinctive control board.  Effortlessly print from cell phones without a system utilizing HP ePrint Wireless Direct Printing.

HP LaserJet Pro P1100w Wireless Setup
HP LaserJet Pro P1102w Wireless Setup

Use the HP LaserJet Pro P1102w Wireless Setup utility to configure the product to print on a wireless network.
  1. Connect the wireless printer HP P1102w to the computer through a USB cable.
  2. Click the Start button, and then click the Programs or All Programs menu item.
  3. Click the HP menu item, and then click the HP LaserJet Pro P1102w Printer series menu item.
  4. Click the Wireless Configuration menu item.
  5. Follow the onscreen instructions to configure the product to print on a wireless network.

Restore default wireless settings

  1. Turn the product off.
  2. Press and hold the wireless button and the cancel button, and then turn the product on.
  3. Hold the buttons until all the lights blink in unison, and then release the buttons. View or change network settings

Use the embedded Web server to view or change IP configuration settings.

1. Print a configuration page, and locate the IP address.
  • If you are using IPv4, the IP address contains only digits. It has this format: xxx.xxx.xxx.xxx
  • If you are using IPv6, the IP address is a hexadecimal combination of characters and digits. It has a format similar to this: xxxx::xxxx:xxxx:xxxx:xxxx
2. To open the embedded Web server, type the IP address into the address line of a Web browser.
3. Click the Networking tab to obtain network information. You can change settings as needed.

HP LaserJet Pro P1102w Wireless Setup or change the network password

Use the embedded Web server to set a network password or change an existing password.
  1. Open the embedded Web server, click the Networking tab, and click the Password link. If a password has previously been set, you are prompted to type the password. Type the password, and then click the Apply button.
  2. Type the new password in the Password box and in the Confirm Password box.
  3. At the bottom of the window, click the Apply button to save the password.

 To change from a USB connection to a wireless network (Windows)

1.  Depending on your operating system, do one of the following:
  • Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, select the printer name, and then click Utilities
  • Windows 7, Windows Vista, and    Windows XP: From the computer desktop, click Start, select  All Programs, click  HP, click the folder of your printer.
2. Click  Printer Setup & Software
3.  Select Convert a USB connected printer to wireless. Follow the on-screen instructions

To change from a USB connection to a wireless network Mac (OS X)

  1. Connect the printer to your wireless network.
  2. Use HP Setup Assistant in Applications/Hewlett-Packard/Device Utilities to change the software connection to wireless for this printer.

HP LaserJet Pro P1102w Setup IP address

The product IP address can be set manually, or it can be configured automatically using DHCP, BootP, or AutoIP. To change the IP address manually, use the HP Embedded Web Server.
  1. Open the HP Embedded Web Server, and then click the Networking tab.
  2. In the navigation pane, click the IPv4 Configuration link or the IPv6 Configuration link.
  3. In the IP Address Configuration section, click the Manual IP option.
  4. Type the required data in the Manual IP Address box, the IP Subnet Mask box, and the Manual Default Gateway box.
  5. Click the Apply button.
Link speed setting
  1. Use the Networking tab in the HP Embedded Web Server to set the link speed if necessary. The setting is on the Advanced page.
  2. Incorrect changes to the link speed setting might prevent the product from communicating with other network devices. For most situations, leave the product in automatic mode. Changes can cause the product to turn off, and then on. Only make changes when the product is idle.

1 comment:

  1. This is awesome info. I expect additional facts like this were distributed me a lot today. 123 hp setup 7640

    ReplyDelete