Epson ET 2600 Wireless Setup Guide

Require a ultra-minimal effort and bother free printer? Epson's ET 2600 without cartridge Eco Tank with print, duplicate and sweep highlights, gives an incredible decision to occupied family units. This 3-in-1 inkjet can diminish printing costs by 74% on average, as it accompanies two years of ink1 incorporated into the container. It's likewise dependable, sans mess, and supported by a guarantee for finish significant serenity.

Furnished with Wi-Fi, the ET-2600 can send records to print from cell phones and tablets utilizing the free Epson iPrint application. You can even email documents from anyplace on the planet by means of Epson Email Print.

Epson ET 2600 Wireless Setup

Epson ET 2600 Wireless Setup Connecting to a Computer

We recommend using the installer to connect the printer Epson ET 2600 Wireless Setup to a computer. You can run the installer using one of the following methods.
1. Setting up from the website
  • Access the following website, and then enter the product name.
  • Go to Setup, and then click Download in the download and connect part. Click or double-click the downloaded file to run the installer. Follow the on-screen instructions.
2. Setting up using the software disc (only for the models that come with a software disc and users  with computers with disc drives.)
  • Insert the software disc into the computer, and then follow the on-screen instructions.
  • Selecting the Connection Methods
  • Follow the on-screen instructions until the following screen is displayed, and then select the connection method of the printer to the computer.

Epson ET 2600 Connecting to a Smart Device

You can use the printer from a smart device when you connect the printer Epson ET 2600 to the same Wi-Fi network (SSID) as the smart device. To use the printer from a smart device, set up from the following website. Access to the website from the smart device that you want to connect to the printer.
If you want to connect a computer and a smart device to the printer at the same time, we recommend connecting the computer first.

Epson ET 2600 Making Wi-Fi Settings from the Control Panel

You can make network settings from the printer's control panel. After connecting the printer to the network, connect to the printer from the device that you want to use (computer, smart phone, tablet, and so on.)

Epson ET 2600 Making Wi-Fi Settings by Push Button Setup

You can automatically set up a Wi-Fi network by pressing a button on the access point. If the following conditions are met, you can set up by using this method.
  • The access point is compatible with WPS (Wi-Fi Protected Setup).
  • The current Wi-Fi connection was established by pressing a button on the access point.
If you cannot find the button or you are setting up using the software, see the documentation provided with the access point.
  1. Hold down the [WPS] button on the access point until the security light flashes. If you do not know where the [WPS] button is, or there are no buttons on the access point, see the documentation provided with your access point for details.
  2. Press button on the printer's control panel until the green light on the left and the orange light on the right alternately blink (approximately 3 seconds). 
The Epson 2600 Wireless Setup connection setting will start. Green light on the left and orange light on the right will simultaneously turn on when the connection is established. Orange light on the right will be automatically turned off within 5 minutes.
  • The printer is in a connection error status when green light on the left is off and orange light on the right is blinking.
  • After clearing the printer error by pressing the button on the control panel, reboot the access point, place it close to
  • the printer and try again. If it still does not work, print a network connection report and check the solution.

Epson ET 2600 Making Wi-Fi Settings by PIN Code Setup (WPS)

You can ET 2600 connect to an access point by using a PIN code that is printed on the network status sheet. You can use this method to set up if an access point is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the access point.
  1. Load papers.
  2. Hold down the button on the printer's control panel for at least 10 seconds. The network status sheet is printed. If you release the button within 10 seconds, a network connection report is printed. Note that PIN code information is not printed on this report.
  3. While holding down the button, press the button until green light on the left and orange light on the right flash simultaneously (approximately 3 seconds).
  4. Use your computer to enter the PIN code (an eight digit number) printed on [WPS-PIN Code] column of the network status sheet into the access point within two minutes. Green light on the left and orange light on the right will simultaneously turn on when the connection is established. Orange light on the right will be automatically turned off within 5 minutes.
  • See the documentation provided with your access point for details on entering a PIN code.
  • The printer is in a connection error status when the green light on the left is off and the orange light on the right is blinking. After clearing the printer error by pressing the button on the control panel, reboot the access point, place it close to the printer and try again. If it still does not work, print a network connection report and check the

Epson ET 2600 Checking the Network Connection Status

Checking the Network Status Using Network Light
You can check the network connection status using the network light on the printer’s control panel.

Epson ET 2600 Printing a Network Connection Report
You can print a network connection report to check the status between the printer and the access point.
  1. Load papers.
  2. Press the button.
The network connection report is printed.

Replacing or Adding New Access Points
If the SSID changes due to the replacement of an access point, or an access point is added and a new network environment is established, re-set the Wi-Fi settings.

Epson ET 2600 Changing the Connection Method to a Computer

Using the installer and re-set up in a different connection method.
1.Setting up from the website
  • Access the following website, and then enter the product name.
  • Go to Setup, and then click Download in the download and connect part. Click or double-click the downloaded file to run the installer. Follow the on-screen instructions.
2. Setting up using the software disc (only for the models that come with a software disc and users with computers with disc drives.)
  • Insert the software disc into the computer, and then follow the on-screen instructions.
  • Selecting Change the Connection Methods
  • Follow the on-screen instructions until the following screen is displayed
3.Windows
  • Select Change or re-set the connection method on the Select Software Installation screen, and then click Next.
    Epson ET 2600 Wireless Setup
4. Mac OS X
  • Select how you want to connect the printer to your computer.
Epson ET 2600 Wireless Setup

Epson ET 2600 Restoring the Network Settings from the Control Panel

You can restore all network settings to their defaults.
  1. Turn the printer off.
  2. While holding down the button, press the button until the green light on the left and the orange light on the right flash alternately.
Restoration is complete when green light on the left and the orange light on the right are off.

0 comments:

Post a Comment