HP DeskJet 3632 Wireless Setup Connection

The HP DeskJet 3632 it simple with an affordable all-in-one printer you can count on. Stay connected with the easiest way to print from your smartphone or tablet. Quickly print, scan, and copy and make room with the space-saving design.
Get easy mobile printing. Start printing and get connected quickly with easy setup from your smartphone, tablet or pc. Connect your smartphone or tablet directly to your printer and easily print without accessing a network. Manage printing tasks and scan on the go with the free HP all-in-one printer remote mobile app. Easily print from a variety of smartphones and tablets. Your pages come out great even if you're not there. Instant Ink not available in ROI.

HP DeskJet 3632 Wireless Setup

HP DeskJet 3632 Wireless Setup Connection

Connect HP DeskJet 3632 to a wireless network using Wi-Fi Protected Setup (WPS). Before you can connect your printer HP DeskJet 3632 Wireless Setup connection network using WPS, make sure you have following:
  • A wireless 802.11b/g/n network that includes a WPS-enabled wireless router or access point.
  • A computer connected to the wireless network that you intend to connect the printer to. Be sure you have installed the HP printer software on the computer.
  • Relatd Product HP Deskjet 3630
If you have a WPS router with a WPS push button, follow the Push Button method. If you are not certain your router has a push button, follow the PIN method.

HP DeskJet 3632 Wireless Setup use the Push Button Configuration (PBC) method

  • Press and hold the Wireless button on the printer for more than three seconds to start WPS push mode. The Wireless light starts blinking.
  • Press the WPS button on your router. The product begins a timer for approximately two minutes while a wireless connection is established.

HP DeskJet 3632 Wireless Setup To use the PIN method

  1. Press the Wireless button and Information button at the same time to print the network configuration page, and then locate a WPS PIN. The WPS PIN is printed at the top of the printed information page.
  2. Press and hold the Wireless button from the printer control panel for more than three seconds. The wireless light starts blinking.
  3. Open the configuration utility or software for the wireless router or wireless access point, and then enter the WPS PIN.
  • For more information about using the configuration utility, see the documentation provided with the router or wireless access point.
  • Wait for about two minutes. If the printer connects successfully, the Wireless light stops blinking but remains lit.

Connect printer HP DeskJet 3632 to a wireless network using HP printer software

To connect the printer HP 3632 to an integrated wireless WLAN 802.11 network, you will need the following:
  • A wireless 802.11b/g/n network that includes a wireless router or access point.
  • A computer connected to the wireless network that you intend to connect the printer to.
  • Network name (SSID).
  • WEP key or WPA Passphrase (if needed).

To connect printer HP 3632 using printer software (Windows)

1. Depending on whether you have installed the HP printer software or not, do one of the following:
If you have not installed the HP printer software on your computer
  • Insert the printer software CD in your computer. During the software installation, a USB cable might be required for temporary connection between the printer and the computer. Do not connect the USB cable until the printer software prompts to do so.
  • When you are prompted, select Wireless, and then follow the on-screen instructions.
If you have the HP printer software installed on your computer
  1. Open the printer software. For more information, see Open the HP printer software (Windows)
  2. In the printer software, click Utilities.
  3. Click Printer Setup & Software.
  4. Click Connect a new printer, click Wireless, and then follow the on-screen instructions.
2. After the printer connects successfully, the blue Wireless light stops blinking and remains on.

To connect printer using HP printer software (OS X)

1. Depending on whether you have installed the HP printer software or not, do one of the following:
If you have not installed the HP printer software on your computer
  • Insert the printer software CD in your computer.
  • Double-click the HP Installer icon on the software CD, and then follow the on-screen instructions
If you have the HP printer software installed on your computer
  • a. Double-click the HP Utility icon (located in the Hewlett-Packard folder in the Applications folder at the top level of the hard disk).
  • b. On the menu bar at the top of the screen, choose Setup New Device from the Devices menu, and then follow the on-screen instructions.
2. After the printer connects successfully, the blue Wireless light stops blinking and remains on.
A. To connect a new printer (Windows)
  • Open the printer software. For more information, see Open the HP printer software (Windows)
  • In the printer software, click Utilities.
  • Select Printer Setup & Software.
  • Select Connect a new printer. Follow the on-screen instructions.
B.To connect a new printer (OS X)
  • Open System Preferences.
  • Depending on your operating system, click Print & Fax, Print & Scan, or Printers & Scanners in the Hardware section.
  • Click + below the list of printers at the left.
  • Select the new printer from the list.

HP DeskJet 3632 Connect wirelessly to the printer without a router

With Wi-Fi Direct, you can print wirelessly from a computer, smart phone, tablet, or other wireless-capable
device without connecting to an existing wireless network.
Guidelines for using Wi-Fi Direct
● Make sure your computer or mobile device has the necessary software.
  • If you are using a computer, make sure you have installed the printer software provided with the printer.
  • If you have not installed the HP printer software on the computer, connect to Wi-Fi Direct first and then install the printer software. Select Wireless when prompted by the printer software for a connection type.
  • If you are using a mobile device, make sure you have installed a compatible printing app.
● Make sure Wi-Fi Direct for HP 3632 printer is turned on.
● Up to five computers and mobile devices can use the same Wi-Fi Direct connection.
● Wi-Fi Direct can be used while the printer is also connected either to a computer using a USB cable or to
a network using a wireless connection.
● Wi-Fi Direct cannot be used to connect a computer, mobile device, or printer to the Internet.

HP DeskJet 3632 To turn Wi-Fi Direct on or off

On the printer HP DeskJet 3632 control panel, press the Wi-Fi Direct button ( ).
  • When Wi-Fi Direct is turned on, the Wi-Fi Direct light is on steady. To find the Wi-Fi Direct name and password, press the Information button ( ) to print a printer information page. When you turn on Wi-Fi Direct the first time, the printer automatically prints a Wi-Fi Direct guide. The guide provides instructions about how to use Wi-Fi Direct. After that, you can press the Wi-Fi Direct button ( ) and the Information button ( ) together to print the Wi-Fi Direct guide. The guide may not be available in all languages.
  • When Wi-Fi Direct is turned off, the Wi-Fi Direct light is off.
  • For more information about the Wi-Fi Direct light status, see Control panel lights and display icons status

HP DeskJet 3632 Wireless Settings

You can set up and manage your printer wireless connection and perform a variety of network management
tasks. This includes printing information about network settings, turning the wireless function on or off, and
changing wireless settings.

To turn on or off the wireless capability of the printer

Press the Wireless button ( ) to turn on or off the printer wireless capabilities.
  • If the printer has an active connection to a wireless network, the Wireless light is on solid blue, and the printer display shows the Wireless icon and the Signal Bars icon.
  • If wireless is turned off, the Wireless light is off.
  • For more information about the wireless status, see Control panel lights and display icons status

To print the wireless network test report and network configuration page

Press the Wireless button ( ) and the Information button ( ) at the same time.
  • The wireless network test report shows the diagnostics results for the status of the wireless network,
  • wireless signal strength, detected networks, and more.
  • The network configuration page shows the network status, hostname, network name, and more.

To change wireless settings (Windows)

This method is available if you have already installed the printer software. This method requires a USB cable. Do not connect the USB cable until prompted to do so.
  1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
  2. In the printer software, click Utilities.
  3. Click Printer Setup & Software.
  4. Select Reconfigure Wireless Settings. Follow the on-screen instructions.

To restore network settings to default settings

Press the Wireless button ( ) and the Cancel button ( ) from the printer control panel at the same time, and then hold them for three seconds. Connect your printer to your computer with a USB cable (nonnetwork connection) The printer supports a rear USB 2.0 High Speed port for connection to a computer.

HP DeskJet 3632 Wireless Setup

To connect the printer with the USB cable

  1. Insert the printer software CD in the computer CD-ROM drive. Do not connect the USB cable to the printer until you are prompted to do so.
  2. Follow the on-screen instructions. When you are prompted, connect the printer to the computer by selecting USB on the Connection Options screen.
  3. Follow the on-screen instructions.
If the printer software has been installed, the printer will operate as a plug-and-play device. If the software
has not been installed, insert the CD that came with the printer and follow the on-screen instructions.

Change from a USB connection to a wireless network

If you first set up HP DeskJet 3632 and installed the software with a USB cable, directly connecting the printer to your computer, you can easily change to a wireless network connection. You will need a wireless 802.11b/g/n network that includes a wireless router or access point.
Before changing from a USB connection to a wireless network, make sure that:
  • The printer is connected to your computer with the USB cable until you are prompted to disconnect the cable.
  • The computer is connected to the wireless network that you intend to install the printer on.

Change from a USB connection to a wireless network (Windows)

  1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
  2. In the printer software, click Utilities.
  3. Click Printer Setup & Software.
  4. Select Convert a USB connected printer to wireless. Follow the on-screen instructions.

To change from a USB connection to a wireless network (OS X)

  1. Connect the printer to your wireless network.
  2. Use HP Setup Assistant in Applications/Hewlett-Packard/Device Utilities to change the software connection to wireless for this printer.

0 comments:

Post a Comment