How To Setup Wireless Printer Canon TS 8020

The TS8020 can connect directly to a computer via USB, or to a network via Wi-Fi. It also supports near field communication (NFC) direct printing from a compatible Android device. It is AirPrint compatible and Mopria certified for direct printing from iOS and compatible Android devices, and can print from the Canon Print app as well. It also supports Google Cloud Print, which lets you send documents to your printer from any Web-connected computer, smartphone, or other mobile device. This section describes How To Setup Wireless Printer Canon TS 8020...?

How To Setup Wireless Printer Canon TS 8020

Canon TS 8020 Wireless Setup Network

 Use the operation panel to print the printer's Canon 8020 current network settings.
The network settings printout contains important information about your network. Handle it with care.
  1. Make sure printer is turned on. If the HOME screen is not displayed, press the HOME button.
  2. Load three sheets of A4 or Letter-sized plain paper.
  3. Tap (Network status) icon.
  4. Check message and tap Yes.
  5. Tap Print details.
  6. Tap Yes.

Canon TS 8020 Wireless Setup LAN

  1. WLAN active/inactive. Enables/disables wireless LAN.
  2. Wireless LAN setup
Selects the setup method for wireless LAN connection.

1. Easy wireless connect
  • Select if you specify the settings of the access point information to the printer directly from a device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen instructions of the connecting device for the setup procedure.
2. Manual connect
  • Select when you perform settings for wireless LAN manually using the operation panel of the printer.
3. WPS (Push button method)
  • Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi Protected Setup (WPS) push button method. Follow the on-screen instructions during setup.
■ Advanced setup
  • Select when you perform settings for wireless LAN manually. You can specify multiple WEP keys.
■ WPS (PIN code method)
  • Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.
Common settings
  • Set printer name
  • You cannot use the same printer name as that already used for other LAN connected devices.
  • You cannot use a hyphen for the initial or last character of the printer name.
  • TCP/IP settings Performs IPv4 or IPv6 setting.


Canon TS 8020 Changing LAN Connection Method

Follow either procedure Canon TS below to change LAN connection method (wired or wireless).
  • For Windows:
  • Use the Setup CD-ROM or follow the instructions on the Canon website to redo setup.
  • Tap the icon on the lower left on HOME screen, select Yes and select Wireless LAN -> WLAN active/inactive -> Active, or select Wired LAN -> Wired LAN active/inactive -> Active according to the connection method you want to use.
After that, perform settings on the Network Settings screen on IJ Network Device Setup Utility.
For details, refer to Performing/Changing Wireless LAN Settings or Performing/Changing Wired
LAN Settings.
  • For Mac OS:
  • Follow the instructions on the Canon website to redo setup.

Canon TS 8020 Changing Wireless LAN Connection Method

Follow either procedure how to setup wireless Printer Canon TS 8020 below to change wireless LAN connection method (infrastructure or wireless
direct).
For Windows:
  • Use the Setup CD-ROM or follow the instructions on the Canon website to redo setup.
  • Perform settings on the Network Settings screen on IJ Network Device Setup Utility.
  • Before you perform settings using 
IJ Network Device Setup Utility, turn on Easy wireless connect mode on the printer following the procedure below.
  1. Make sure printer is turned on.
  2. Tap (Network status) icon. Using the Operation Panel
  3. Check message and tap Yes.
  4. Tap LAN settings.
  5. Tap Wireless LAN.
  6. Tap Wireless LAN setup.
  7. Tap Easy wireless connect.
  8. Check message and tap Yes. Follow instructions on your smartphone or tablet.
  9. If message saying setup is completed appears, tap OK.
• For Mac OS:
Follow the instructions on the Canon website to redo setup.

Printer Canon TS 8020 Wireless Setup Direct

You can connect devices (e.g. smartphone, or tablet) to the printer by two methods below.
  • Wireless connection (connecting devices via a wireless router)
  • Direct wireless connection (connecting devices using Wireless Direct)
This section describes Canon TS 8020 wireless set up direct, which allows you to print or scan by connecting the devices to the printer directly.
Follow the procedure below to use Wireless Direct.
  1. Changing Printer's Settings
  2. Changing Settings of a Device and Connecting It to the Printer
  3. Printing/Scanning with Wireless Direct
This section also describes changing Wireless Direct to wireless LAN.
Changing Printer Setting to Use Wireless LAN Important
  • You can connect up to 5 devices to the printer at the same time.
  • Check the usage restrictions and switch the printer to the Wireless Direct.
Preparing for Wireless Direct
Change settings below to prepare for Wireless Direct.
  • Printer's LAN settings
Changing Printer's Settings
  • Settings of a device to connect
Changing Settings of a Device and Connecting It to the Printer Canon TS 8020
Changing Printer's Settings
  1. Make sure printer is turned on.
  2. Select Setup on the HOME screen.
  3. Select Settings.
  4. Select Device settings.
  5. Select LAN settings.
  6. Select Wireless Direct.
  7. Select Wireless Direct active/inactive.
  8. Select ON. The confirmation screen asking if you display the password information appears.
  9. Select Yes or No.
The list of  TS 8020 Wireless Direct settings is displayed.
The device detects the printer by the identifier (SSID).
  • You can check the following.
  • SSID
  • Security setting
  • Password
  • Printer's name which appears on a Wi-Fi Direct compatible device
The password is required when connecting a device to the printer. Depending on the device you are using, no password is required.
When you connect a Wi-Fi Direct compatible device to the printer, select the device name displayed on the touch screen from your device.
  • The identifier (SSID) and the security setting are specified automatically. To update them, see below.
   10. Select OK.
The Wireless Direct is enabled and a device can be connected to the printer wirelessly.

Changing Settings of a Device and Connecting It to the Printer

1. Turn on wireless communication on your device.
  • Enable "Wi-Fi" on your device's "Setting" menu.
  • For more on turning on wireless communication, see your device's instruction manual.
2. Select "DIRECT-XXXX-TS8020series" ("X" represents alphanumeric characters) from list displayed on device.
  • If "DIRECT-XXXX-TS8020series" does not appear on the list, Wireless Direct is not enabled.
3. Enter password.
  • Your device is connected to the printer.
How To Setup Wireless Printer Canon TS 8020

Changing Printer Setting to Use Wireless LAN

Follow the procedure below to change the printer setting to use wireless LAN.
  1. Select Setup on the HOME screen.
  2. Select Settings.
  3. Select Device settings.
  4. Select LAN settings.
  5. Select Wireless LAN.
  6. Select WLAN active/inactive.
  7. Select Active.
If you do not use the printer over wireless LAN, select Inactive.

Canon TS 8020 Changing Wireless Direct Setting

Change the settings for the Wireless Direct following the procedure below.
1. Make sure printer is turned on.
2. Select Setup on the HOME screen.
3. Select Settings.
4. Select Device settings.
5. Select LAN settings.
6. Select Wireless Direct.
7. Select a setting item.
  • To update the identifier (SSID) and the password for Wireless Direct
  • Tap A to display the confirmation screen. To update the identifier (SSID) and the password, tap Yes.
  • To check the security setting and the updated password, tap Details and tap Yes on the screen displayed next.
  • To change the printer's name displayed on the Wi-Fi Direct compatible device Tap B to display the printer's name (device name) displayed on a Wi-Fi Direct compatible device.
      Follow the procedure below to change the name.
  1. Tap touch screen.
  2. Enter device name (up to 32 characters).
  3. Tap OK to finish entering device name.
  4. Tap OK to finish specifying device name.
  • To change the confirmation screen setting when a Wi-Fi Direct compatible device is connecting to the printer Tap C to display the confirmation screen. If you want the printer to display the screen to inform you a Wi-Fi direct compatible device is connecting to the printer, tap Yes.
  • To prevent an unauthorized access, we recommend you should not change the setting from the default.
  • To check the current Wireless Direct settings Tap D to display the confirmation screen. To check the current Wireless Direct settings, tap Yes.
  • If you select Print details, you can print the network settings.
8. Press HOME button.
  • The HOME screen is displayed.
  • Related wireless setinggs Canon TS 9050

0 comments:

Post a Comment