Canon PIXMA TS8020 Wireless Printer Setup

Use the operation panel to print the Canon PIXMA TS8020 wireless printer setup current network. The network settings printout contains important information about your network. Handle it with care.
  1. Make sure printer is turned on. If the HOME screen is not displayed, press the HOME button.
  2. Load three sheets of A4 or Letter-sized plain paper.
  3. Tap (Network status) icon.
  4. Check message and tap Yes.
  5. Tap Print details.
  6. Tap Yes.
The printer starts printing network settings information.
The printed network settings information is as follows: (Some setting values are not displayed depending on the printer settings.)
Canon PIXMA TS8020 Wireless Printer Setup

Canon PIXMA TS8020 Wireless Printer Setup Changing LAN Connection Method

Follow either procedure below to change LAN connection method (wired or wireless).
• For Windows:
  • Use the Setup CD-ROM or follow the instructions on the Canon website to redo setup.
  • Tap the icon on the lower left on HOME screen, select Yes and select Wireless LAN -> WLAN active/inactive -> Active, or select Wired LAN -> Wired LAN active/inactive -> Active according to the connection method you want to use. After that, perform settings on the Network Settings screen on IJ Network Device Setup Utility.
• For Mac OS:
  • Follow the instructions on the Canon website to redo setup.

Changing Wireless LAN Connection Method

Follow either procedure below to change wireless LAN connection method (infrastructure or wireless
direct).
  • For Windows:
  • Use the Setup CD-ROM or follow the instructions on the Canon website to redo setup.
  • Perform settings on the Network Settings screen on IJ Network Device Setup Utility.
  • Before you perform settings using IJ Network Device Setup Utility, turn on Easy wireless connect mode on the printer following the procedure below.
  1. Make sure Canon TS8020 is turned on. If the HOME screen is not displayed, press the HOME button.
  2. Tap (Network status) icon.
  3. Check message and tap Yes.
  4. Tap LAN settings.
  5. Tap Wireless LAN.
  6. Tap Wireless LAN setup.
  7. Tap Easy wireless connect.
  8. Check message and tap Yes. Follow instructions on your smartphone or tablet.
  9. If message saying setup is completed appears, tap OK.
• For Mac OS:
Follow the instructions on the Canon website to redo setup.

Canon PIXMA TS8020 Using Wireless Direct

You can connect devices (e.g. smartphone, or tablet) to the PIXMA TS8020 by two methods below.
  • Wireless connection (connecting devices via a wireless router)
  • Direct wireless connection (connecting devices using Wireless Direct)
This section describes Wireless Direct, which allows you to print or scan by connecting the devices to the printer directly.

Changing Printer's Settings

  1. Make sure printer is turned on.
  2. Select Setup on the HOME screen.
  3. Select Settings.
  4. Select Device settings.
  5. Select LAN settings.
  6. Select Wireless Direct.
  7. Select Wireless Direct active/inactive.
  8. Select ON. The confirmation screen asking if you display the password information appears.
  9. Select Yes or No. The list of Wireless Direct settings is displayed. The device detects the printer by the identifier (SSID).
  10. Select OK.
The Canon PIXMA TS8020 Wireless Direct is enabled and a device can be connected to the printer wirelessly. Changing Settings of a Device and Connecting It to the Printer
  1. Turn on wireless communication on your device. Enable "Wi-Fi" on your device's "Setting" menu. For more on turning on wireless communication, see your device's instruction manual.
  2. Select "DIRECT-XXXX-TS9000series" ("X" represents alphanumeric characters) from list displayed on device
  3. Enter password. Your device is connected to the printer.

Changing Printer Setting to Use Wireless LAN

Follow the procedure below to change the printer setting to use wireless LAN.
  1. Select Setup on the HOME screen.
  2. Select Settings.
  3. Select Device settings.
  4. Select LAN settings.
  5. Select Wireless LAN.
  6. Select WLAN active/inactive.
  7. Select Active.
If you do not use the printer over wireless LAN, select Inactive.

Changing Wireless Direct Setting

Change the settings for the Wireless Direct following the procedure below.
  1. Make sure printer is turned on.
  2. Select Setup on the HOME screen.
  3. Select Settings.
  4. Select Device settings.
  5. Select LAN settings.
  6. Select Wireless Direct.
  7. Select a setting item.
  • Tap A to display the confirmation screen. To update the identifier (SSID) and the password, tap Yes. To check the security setting and the updated password, tap Details and tap Yes on the screen displayed next.
  • To change the printer's name displayed on the Wi-Fi Direct compatible device Tap B to display the printer's name (device name) displayed on a Wi-Fi Direct compatible device. Follow the procedure below to change the name.
  1. Tap touch screen.
  2. Enter device name (up to 32 characters).
  3. Tap OK to finish entering device name.
  4. Tap OK to finish specifying device name.
  • To change the confirmation screen setting when a Wi-Fi Direct compatible device is connecting to the printer Tap C to display the confirmation screen. If you want the printer to display the screen to inform you a Wi-Fi direct compatible device is connecting to the printer, tap Yes.
  • To check the current Wireless Direct settings; Tap D to display the confirmation screen. To check the current Wireless Direct settings, tap Yes.
    8. Press HOME button.

0 comments:

Post a Comment