Canon PIXMA TS8050 Wireless Printer Setup

Canon PIXMA TS8050 Wireless Printer Setup, Connecting the Printer to a Network
Available Connection Methods
The following connection methods are available on the printer.
• Wireless Connection
  1. Connect the printer and computer/smartphone/tablet using a wireless router.
  2. If you have a wireless router, we recommend you use one for wireless connection.
• Wireless Direct
  • Connect the printer and computer/smartphone/tablet without using a wireless router.
• Wired Connection
  • Connect the printer and hub/router using a LAN cable. Prepare a LAN cable.
For more on connection method, see Available Connection Methods.
Canon PIXMA TS8050 Wireless Printer Setup

Canon PIXMA TS8050 Wireless Printer Setup Network Connection

Perform connection setup for the printer and computer/smartphone/tablet.

Using Printer with Wireless Direct

Canon PIXMA TS8050 Application Software for Network (Windows)
For Windows, you can use IJ Network Device Setup Utility to perform network settings. It allows a network/printer administrator to manage printers on network.
When connecting another device while a device (such as a smartphone) is already connected to the printer, connect it using the same connection method as the connected device.
If you connect using a different connection method, the connection to the device in use will be disabled.
Connection Using a Wired Network cannot be performed on printers that do not support a wired connection.

Canon PIXMA TS8050 Wireless Setup Connect via wireless router

  1. You cannot establish a printer with wireless and wired connections at the same time.
  2. Make sure your device and the wireless router are connected. For details on checking these settings, see the manual supplied with the wireless router or contact its manufacturer.
  3. As for a device already connected to the printer without using a wireless router, reconnect it via a wireless router.
  4. Configuration, router functions, setup procedures and security settings of network devices vary depending on the system environment. For details, see the manual for your network device or contact its manufacturer.
  5. This printer does not support IEEE802.11ac, IEEE802.11a, or IEEE802.11n (5 GHz). Check if your device supports IEEE802.11n (2.4 GHz), IEEE802.11g or IEEE802.11b.
  6. If your device is set to the "IEEE802.11n only" mode, WEP or TKIP cannot be used as a security protocol. Change the security protocol for your device to something other than WEP and TKIP or change the setting to something other than "IEEE802.11n only." The connection between your device and the wireless router will be temporarily disabled while the setting is changed. Do not proceed to the next screen of this guide until setup is complete.
  7. For office use, consult your network administrator.
  8. Note that if you connect to a network with no security protection, your personal information could be disclosed to a third party.
  9. If you connect a device and the printer using Wireless Direct, Internet connection may become unavailable depending on your environment. In that case, web services for the printer cannot be used.
  10. In Wireless Direct mode, you can connect up to five devices at the same time. If you try to connect a sixth device while five devices are already connected, an error will appear.
  11. If an error appears, disconnect a device that does not use the printer, then configure settings again.
  12. Devices connected to the printer using Wireless Direct cannot communicate with each other.
  13. Firmware updates for the printer are not available while using Wireless Direct.
  14. When a device has been connected to the printer without using a wireless router and you want to set it up again using the same connection method, disconnect it first. Disable the connection between the device and printer in the Wi-Fi setting screen.

Connection Using a Wired Network

  1. You cannot establish a printer with wireless and wired connections at the same time.
  2. When using a router, connect the printer and a device to the LAN side (same network segment).
Using Printer with Wireless Direct
You can connect devices (e.g. smartphone, or tablet) to the printer by two methods below.
  • Wireless connection (connecting devices via a wireless router)
  • Direct wireless connection (connecting devices using Wireless Direct)
This section describes Wireless Direct, which allows you to print or scan by connecting the devices to the printer directly.
Follow the procedure below to use Wireless Direct.

Canon PIXMA TS8050 Printer's Settings

  1. Make sure PIXMA TS8050 is turned on.
  2. Select Setup on the HOME screen. Using the Operation Panel
  3. Select Settings.
  4. Select Device settings.
  5. Select LAN settings.
  6. Select Wireless Direct.
  7. Select Wireless Direct active/inactive.
  8. Select ON. The confirmation screen asking if you display the password information appears.
  9. Select Yes or No. the list of Wireless Direct settings is displayed. The device detects the printer by the identifier (SSID).
  10. Select OK.
The Wireless Direct is enabled and a device can be connected to the printer wirelessly.

Canon PIXMA TS8050 Wireless Settings of a Device and Connecting It to the Printer

  1. Turn on wireless communication on your device.
  2. Select "DIRECT-XXXX-TS9000series" ("X" represents alphanumeric characters) from list displayed on device.
  3. Enter password.
Your device is connected to the printer.

Canon PIXMA TS8050 Wireless Setup to Use Wireless LAN

Canon PIXMA TS8050 Wireless setup Follow the procedure below to change the printer setting to use wireless LAN.
  1. Select Setup on the HOME screen. Using the Operation Panel
  2. Select Settings.
  3. Select Device settings.
  4. Select LAN settings.
  5. Select Wireless LAN.
  6. Select WLAN active/inactive.
  7. Select Active.
If you do not use the Canon PIXMA TS8050 over wireless LAN, select Inactive.

Canon PIXMA TS8050 Wireless Direct Setting

Change the settings for the Wireless Direct following the procedure below.
  1. Make sure printer is turned on.
  2. Select Setup on the HOME screen.
  3. Select Settings.
  4. Select Device settings.
  5. Select LAN settings.
  6. Select Wireless Direct.
  7. Select a setting item.
  8. Press HOME button.

0 comments:

Post a Comment