Showing posts with label Epson WF 4630. Show all posts
Showing posts with label Epson WF 4630. Show all posts

Epson WF 4630 Wireless Printer Setup Guide

You can select or change wireless network settings using Epson printer control panel.
To install Epson 4630 on a wireless network, follow the instructions on the Start Here sheet and install the necessary software. The installer program guides you through network setup.
Epson WF 4630 Wireless Printer Setup

Epson WF 4630 Wireless Printer Setup

To Epson WF 4630 Wireless Printer Setup network follow prosedure
  1. Press the home button, if necessary.
  2. Press .
  3. Select Epson WF 4630 Wi-Fi Setup.
  4. Select Wi-Fi Setup Wizard. if you need to disable the wireless network to set up your product on an Ethernet network, scroll down and select Disable Wi-Fi instead. Then follow the instructions on changing to a wired network connection in this guide.
  5. Select the name of your wireless network or enter the name manually. To enter the wireless network name manually, select Other Networks and select the Network (SSID) field. Use the displayed keypad to enter your network name.
  6. Select the Password field and enter your wireless password using the displayed keypad. The network name and password are case sensitive. Be sure to correctly enter uppercase and lowercase letters, and numeric or special characters.
  7. Press when you finish entering your password and select Proceed.
  8. Confirm the displayed network settings and select OK to save them. If you need to change a setting, press the back button.
  9. If you want to print a network setup report, press one of the buttons. (Otherwise, select Done.)
  10. Press the home button to return to the Home screen.
If the network connection is successful, the Wi-Fi icon in the upper-right corner of the LCD screen is
lit as shown.

Epson WF 4630 Setup Wi-Fi Direct Mode

You can set up Epson WF 4630 to communicate directly with your computer or another device without requiring a wireless router or access point.
  1. Epson WF 4630
  2. Computer with a wireless interface
  3. Other wireless device
Your printer automatically selects one of these modes to communicate with your computer or device:

Access point mode

If  Epson WF 4630 is not already connected to a wireless network, it enters access point mode and the product itself acts as the network access point for up to 4 devices. When operating in this mode, your product displays an AP connection symbol on the LCD screen.

Peer-to-peer mode

If Epson WF 4630 is already connected to a wireless network, it enters peer-to-peer mode and disconnects from any other networks. This also disables any other product features requiring access to the Internet. When operating in this mode, your product displays a Direct or D connection symbol
on the LCD screen.
To disconnect a peer-to-peer mode connection, release the connection to your product from your computer or other device. Your product will reconnect to the previously used network.

Epson WF 4630 Enabling Wi-Fi Direct Mode

You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or other devices without a wireless router or access point.
  1. Press the home button, if necessary.
  2. Press .
  3. Select Wi-Fi Setup.
  4. Scroll down and select Wi-Fi Direct Setup.
  5. Select Connection Setup.
  6. Select Change Password and select Yes
  7. Enter your Wi-Fi Direct password.
  8. Press when you finish entering your password.
  9. Scroll down to view the SSID (Wi-Fi network name) and password.
  10. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the LCD screen, then enter the password shown.
  11. Press the home button to return to the Home screen.
You see either an AP or Direct connection symbol on the LCD screen and should be able to print
directly to your product from your computer or device.
If the AP or Direct connection symbol is not displayed on the LCD screen, Wi-Fi Direct mode
is not enabled. Repeat these steps to try again.
video

Epson WF 4630 Wi-Fi Protected Setup (WPS)

If your network uses a WPS-enabled wireless router or access point, you can quickly connect Epson WF 4630 to the network using Wi-Fi Protected Setup (WPS).
To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device. Check your network product documentation for details.

Epson WF 4630 Using WPS to Connect to a Network

If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to connect Epson WF 4630 to the network.
  1. Press the home button, if necessary.
  2. Press .
  3. Select Wi-Fi Setup.
  4. Select Push Button Setup (WPS).
  5. Follow the instructions on the LCD screen to complete WPS setup.
  6. Press the home button to return to the Home screen.