Showing posts with label HP DeskJet 3050. Show all posts
Showing posts with label HP DeskJet 3050. Show all posts

HP DeskJet 3050 Wireless Printer Setup

To connect the HP DeskJet 3050 wireless printer setup network using WiFi Protected Setup (WPS), you will need the following:
  1. A wireless 802.11 network that includes a WPS-enabled wireless router or access point.
  2. A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP All-in-One on.
HP DeskJet 3050 Wireless Printer Setup

HP DeskJet 3050 Wireless Printer Setup

To connect the HP DeskJet 3050 wireless setup using WiFi Protected Setup (WPS)
Use Push Button (PBC) method Set up wireless connection.
  1. Press the wireless button on the control panel to show the wireless menu options on the printer HP DeskJet 3050 display.
  2. Select Wireless Settings on the printer display.
  3. Select WPS.
  4. Select Push Button and follow the on-screen instructions on the printer display.
  5. The product begins a timer for approximately two minutes in which the corresponding button on the networking device needs to be pressed.
Use PIN method Set up wireless connection.
  1. Press the wireless button on the control panel to show the wireless menu options on the printer display.
  2. Select WiFi Settings on the printer display.
  3. Select WPS.
  4. Select PIN. The printer display will display a PIN.
  5. Enter the PIN on WPS-enabled router or other networking device.
  6. Follow the on-screen instructions on the printer display.
The DeskJet 3050 begins a timer for approximately two minutes in which the PIN needs to be entered on the networking device.

HP DeskJet 3050 Connect to wireless network using HP printer software

To connect the printer to an integrated wireless WLAN 802.11 network, you will need the following:
  1. A wireless 802.11b/g/n network that includes a wireless router or access point.
  2. A computer connected to the wireless network that you intend to connect the printer to.
  3. Network name (SSID).
  4. WEP key or WPA Passphrase (if needed).

To connect your printer using HP printer software (Windows)

1. Depending on whether you have installed the HP printer software or not, do one of the following:
If you have not installed the HP printer software on your computer
  • Insert the printer software CD in your computer. During the software installation, a USB cable might be required for temporary connection between the printer and the computer. Do not connect the USB cable until the printer software prompts to do so.
  • When you are prompted, select Wireless, and then follow the onscreen instructions.
If you have the HP printer software installed on your computer
  1. Open the printer software. For more information, see Open the HP printer software (Windows)
  2. In the printer software, click Tools.
  3. Click Device Setup & Software.
  4. Click Connect a new device, click Wireless, and then follow the onscreen instructions.
2. After the printer connects successfully, the blue Wireless light stops blinking and remains on.

To connect HP DeskJet 3050 using HP printer software (OS X)

1. Depending on whether you have installed the HP printer software or not, do one of the following:
If you have not installed the HP printer software on your computer
  1. Insert the printer software CD in your computer.
  2. Double-click the HP Installer icon on the software CD, and then follow the onscreen instructions.
If you have the HP printer software installed on your computer.
  • Double-click HP Utility in the HP folder in the Applications folder.
  • On the menu bar at the top of the screen, choose Setup New Device from the Devices menu, and then follow the onscreen instructions.
2. After the printer connects successfully, the blue Wireless light stops blinking and remains on.

To connect a new printer (Windows)

  1. Open the printer software. For more information, see Open the HP printer software (Windows)
  2. In the printer software, click Tools.
  3. Select Device Setup & Software.
  4. Select Connect a new device. Follow the onscreen instructions.

To connect a new printer (OS X)

  1. Open System Preferences .
  2. Depending on your operating system, click Printers & Scanners .
  3. Click + below the list of printers at the left.
  4. Select the new printer from the list.

HP DeskJet 3050 Traditional Wireless Connection

To connect the HP All-in-One to an integrated wireless WLAN 802.11 network, you will need the following:
  1. A wireless 802.11 network that includes a wireless router or access point. If you connect the HP All-in-One on a wireless network that has Internet access, HP recommends that you use a wireless router (access point or base station) that uses Dynamic Host Configuration Protocol (DHCP).
  2. A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP All-in-One on.
  3. Network name (SSID).
  4. WEP key or WPA Passphrase (if needed).
To connect the product
  1. Insert the product Software CD in the computer CD-ROM drive.
  2. Follow the instructions on the screen. When you are prompted, connect the product to the computer using the USB setup cable included in the box. Follow the onscreen prompts to enter your wireless network settings. The product will attempt to connect to the network. If the connection fails, follow the prompts to correct the problem, and then try again.
  3. When the setup is finished, you will be prompted to disconnect the USB cable and test the wireless network connection. Once the product connects successfully to the network, install the software on each computer that will use the product over the network.

HP DeskJet 3050 USB Connection

The HP All-in-One supports a rear USB 2.0 High Speed port for connection to a computer.
  1. To connect the HP DeskJet 3050 with the USB cable connecting to a computer with a USB cable.
  2. Do not connect the USB cable to the product until you are prompted to do so.
  3. To enable printer sharing on a Windows computer Refer to the user guide that came with your computer or see the Windows onscreen
To connect the printer with the USB cable
  1. Insert the printer software CD in the computer CD-ROM drive. Do not connect the USB cable to the printer until you are prompted to do so.
  2. Follow the onscreen instructions. When you are prompted, connect the printer to the computer by selecting USB on the Connection Options screen.
  3. Follow the onscreen instructions.
If the printer software has been installed, the printer will operate as a plug-and-play device. If the software has not been installed, insert the CD that came with the printer and follow the onscreen instructions
If you first set up your printer and installed the software with a USB cable, directly connecting the printer to your computer, you can easily change to a wireless network connection. You will need a wireless 802.11b/g/n network that includes a wireless router or access point.
Before changing from a USB connection to a wireless network, make sure that:
  1. The printer is connected to your computer with the USB cable until you are prompted to disconnect the cable.
  2. The computer is connected to the wireless network that you intend to install the printer on.

Change from a USB connection to a wireless network (Windows)

1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
2. In the printer software, click Tools.
3. Click Device Setup & Software.
4. Select Convert a USB connected printer to wireless. Follow the onscreen instructions.

To change from a USB connection to a wireless network (OS X)

1. Connect the printer to your wireless network.
2. Use 123.hp.com to change the software connection to wireless for this printer.
3. Related setup HP DeskJet 3630 Wireless Setup